Avi Vantage Interaction with vCenter
Avi Vantage may be deployed with a VMware cloud in either no access, read access, or write access mode. Each mode results in escalating functionality and automation, but also requires higher levels of privilege for the Avi Controller within VMware vCenter.
Note: VM migration of the Controller and Service Engine images using vMotion is not supported. It is recommended to use Avi Vantage’s built-in virtual service migration functionality.
- In case of planned maintenance, the Avi Controller spins up a new SE on a different host and non-disruptively migrates all applications (virtual services) to the new SE.
- In case of a host outage, as part of Avi Vantage’s self-healing capability, the Avi Controller automatically moves virtual services to a different SE (spinning up a new SE if needed). Furthermore, if elastic active/active HA has been configured, there is no disruption to application traffic.
Initial Discovery (Read Operation)
- Datacenter: Discovered datacenters are provided as a list for the user to select the specific datacenter for more detailed discovery.
- Networks: This includes all networks (standard/distributed portgroup)
- Networks: It provides networks as a list for the user to select the “Management Network”
- IP Subnet: The IP subnet for each portgroup based on vNiCs in that portgroup (if
vmtoolsis running on the VM). The IP subnet learned is used for placing the virtual service on appropriate networks.
- Hosts: Used to execute the placement algorithms for creating SE VMs
- Clusters: Used to constrain the set of ESX hosts to be considered while creating the SE VMs
- Virtual Machines: All the virtual machines in the datacenter are discovered. This is to retrieve the IP subnet for each network. Discovered virtual machines also aid in the pool server selection.
- Datastores: The user can select which datastore to use for SE VM creation (only shared datastores are considered).
Service Engine VM Creation (Read/Write operation)
The Avi Controller interacts with vCenter’s OVF Manager to spawn an SE VM. The Controller needs the following access while in write access mode.
- Folders: The Avi Controller creates the SE VM in the default “AviSeFolder” or a folder the user specifies. It creates the folder “AviSeFolder” if it is not present.
- Datastores: The Avi Controller performs the data transfer for the SE VM directly to the ESX host’s datastore.
- Network: 9 out of 10 vNICs for the SE VM are placed in the “Avi Internal” portgroup of vSwitch0. The “Avi Internal” standard portgroup is created in vSwitch0 of the ESX host. If vSwitch0 (default standard switch) is not present, then the Avi Controller creates vSwitch0 in the ESX host.
- vApp: The Avi Controller updates OVF parameters of the SE VM which relate to vApp functionality.
VS Placement and VM Deletion
- VS Placement: When placing a virtual service on an SE VM (Write Operation), the Avi Controller moves vNICs of the SE VM from “Avi Internal” to the required portgroup (standard/distributed). That stitches the network connectivity for the VS while in write access mode.
- VM Deletion: The Avi Controller deletes the SE VM by interacting with vCenter.
The Avi Controller retrieves stats from vCenter for virtual machines and hosts. This data is for metrics-based analytics, such as assigning resource penalties. This data is queried by Avi Vantage while in both read and write access modes.
Custom vCenter Roles
Avi Vantage may leverage a custom role created within vCenter to limit the scope of access, as shown below. No change is required on Avi Vantage.
vCenter Connectivity Probes
Avi Vantage takes the following measures to verify connectivity with vCenter on an ongoing basis.
- Initial login to vCenter
When a vCenter cloud is configured in Avi Vantage, a user login request is sent to the vCenter. The response time for the login request is measured. If it is greater than 10 seconds, an error is displayed in the Avi UI. Concurrently, a system event (VCENTER_ACCESS_SLOW) is generated.
- 5-second probe
Avi Controller polls the vCenter every 5 seconds for changes in objects such as virtual machines, datacenters, clusters, networks, and ESX hosts.
- 1-minute probe
The Avi Controller polls the vCenter once every minute to retrieve vCenter performance stats for the SE VMs and back-end server VMs configured in the pools.
- 10-minute probe
The Avi Controller issues an
sshprobe to all the ESX hosts present in the datacenter. This ensures that connectivity is still intact between the Avi Controller and the ESX host. The
vmdkfor the SE VM gets transferred directly to the ESX host.
Avi Controller also initiates a new connection request every 10 minutes to ensure that the user credentials configured for the vCenter cloud are valid. vCenter credentials are changed once every 6 months or 1 year, depending on the customer’s security policy.